4 Channel Receiver
Model 4224
4 channel rolling code receiver for 12V or 24V AC/DC door supplies. Works with the 4244 forklift transmitter and the 4216 fob.
The model 4224 is a 4 channel rolling code receiver, designed to work with the Amber 4244 fork lift truck transmitter and the 4216 4 channel key fob. It runs from a 12V or 24V AC or DC door supply, and the supply terminals aren't polarity conscious.
Each channel has its own volt-free relay, rated at 240V 3A AC or 30V 3A DC, which can be set to momentary or latching operation with a DIP switch. The antenna is fixed inside and protected by the sliding case cover, there are test buttons on the case, and mounting screws are included.
Up to 30 transmitter codes can be stored. Once one transmitter is programmed in, it can be used to add more without taking the cover off.
Prices on request. Call +44 1543 732094 or email sales@amber-controls.com.
Features
- 12V or 24V AC or DC door supply
- Secure rolling code decoding
- Memory for up to 30 transmitters
- 433.92 MHz, internationally approved
- Fixed internal antenna
- Sliding case cover
- Test buttons on the case
- Easy fitting, mounting screws included
Specification
- Channels
- 4
- Frequency
- 433.92 MHz, internationally approved
- Code type
- Rolling code
- Memory
- Up to 30 transmitter codes
- Supply
- 12–24V AC or DC
- Relay outputs
- 4 × volt-free NO/NC, 240V 3A AC (0.5 HP), 30V 3A DC
- Relay mode
- Momentary or latching, per channel
- Antenna
- Fixed, internal
- Operating temperature
- −20 to +60 °C
- Dimensions
- 135 × 78 × 29 mm (5.3 × 3.1 × 1.1 in)
Mount the receiver in a plastic control box, away from contactors, timers and inverters. A steel box will block the radio signal.
Interested in the 4 Channel Receiver?
Tell us the door type and size, or which products you're interested in, and we'll come back to you with the right model and a quote.